204 East 15th Street
Eldon, Missouri 65026
We make our own carburetor rebuilding kits. All components of all kits are made in the U.S.A. We currently have listings for 82,000 carburetors, and offer more than 10,000 different rebuilding kits. We continually are updating the listings, and researching additional kits. We offer kits for the following categories: passenger, truck, tractor, industial, marine, military, agricultural, and some import and small engine. We will not produce kits for either aircraft or LPG carburetors. Excluding small engine our kit coverage for U.S.A. produced carburetors is:
1974-1925 99.9 percent 1925-1912 80 percent 1911-1902 approximately 20 percent
Carburetor kits do not all contain the same components. As an example, OUR kit for 1965 Pontiac GTO with Carter 4 barrel AFB contains the following: gasket set including flange gasket, fuel valves (needles and seats), complete accelerator pump, pump return spring, pump inlet check valve, pump discharge check valve, idle mixture screws, primary metering jets, step-up pistons, step-up piston springs, and pin springs. We also offer a second level kit that contains the first level plus choke plate screws, throttle plate screws, and the special fillister head screws affixing the airhorn to the bowl, and the venturi clusters to the bow. If you wish to know the contents of a kit that you are interested in buying, please ask when you telephone us. We will be happy to look up the bill-of-material for your kit while you are on the telephone. Sorry, this courtesy cannot be extended to e-mail or fax.
We currently produce kits for the following carburetors: Autolite, Cadillac, Carter, Chandler Groves, Detroit Lubricator, Ensign, Essex, Holley, Hudson, I.H.C., Kingston, Marvel, Marvel Schebler, Penberthy, Rayfield, Riley, Rochester, Schebler, Simmons, Stewart, Stromberg, Tillotson, Zenith.
We can produce other kits than those listed, but may need to see your carburetor to use as samples to produce the necessary drawings.